Table of Contents
Advertisement
Handset priority
1. Select
Menu
and scroll
Settings
. Select
OK
2. Select
OK
. Use
UP
All Handsets
– all handsets ring together. Select
Select Handset
– to choose one handset to ring first.
OK
Select
then scroll
OK
want, and select
how many rings the handset will give before the other
handsets start ringing as well. Select
Display shows
Handset Priority Saved
3. Select
Back
to return to the previous screen.
Dial mode
1. Select
Menu
and scroll
Settings
. Select
OK
2. Select
OK
. The current setting is highlighted.
3. Press
UP
or
DOWN
OK
Select
to confirm.
4. Select
Back
to return to the previous screen.
If you experience any problems, please call the Helpline on 0870 605 8047
UP/DOWN/LEFT/RIGHT
. Scroll
DOWN
to
Handset Priority
or
DOWN
to select from:
UP
DOWN
or
to the handset you
UP
DOWN
. Now scroll
or
OK
.
UP/DOWN/LEFT/RIGHT
. Scroll
DOWN
to
Dial Mode
to select
Tone Mode
to
Base
.
OK
to select
.
to
Base
.
or
Pulse Mode
.
Base settings
If you have more than one handset
registered to your base, they all
ring at the same time.
With handset priority, you can set
one handset to ring before the
others.
Switch to Pulse during a call
If you have dialled out from a
switchboard using Pulse dialling,
you can switch to Tone dialling
during the call by pressing and
holding the
button.
See also, Connecting to a
switchboard, page 80.
Your BT Zenith Flip is set to TONE
dialling. You should never need to
change this unless connected to a
switchboard that requires PULSE
dialling. Check with your
switchboard supplier.
65
Advertisement
Table of Contents
