Handset Ringing Priority; Recall Mode; Repeater Mode; System Pin - BT Diverse 7110 Plus User Manual

Handset ringing priority

1. Press , scroll
Menu
2. Scroll to
BS Settings
3. Scroll to
Ring Priority
is highlighted. Press
4.
All Handsets
ring together.
Or
Scroll to
Select Handset
to select the handset you want to ring first. Press
The ring delay option is highlighted. Press
the number of rings before the other handsets ring. Press
5. Press to return to the previous menu.
Back

Recall mode

1. Press , scroll
Menu
2. Scroll to
BS Settings
3. Scroll to
Recall Mode
4. Press or
press .
OK

Repeater mode

1. Press Menu, scroll
2. Scroll to Settings. Press OK.
BS
3. Scroll to
Repeater
is highlighted. Scroll
4.
Off
5. Press to return to the idle screen.

System PIN

1. Press , scroll
Menu
2. Scroll to
BS Settings
3. Scroll to
System PIN
4. Enter the old PIN (default setting 0000) and press
5. Enter the new PIN and press
press . Press
OK Back
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
to and press
Settings
. Press .
OK
. Press .
OK
for all handsets to
OK
. Press
OK
to and press
Settings
. Press .
OK
. Press .
OK
to select
Timed Break
to and press OK.
Settings
Mode. Press OK.
to and press OK.
On
to and press
Settings
. Press .
OK
. Press .
OK
. Re-enter the new PIN and
OK
to return to the previous menu level.
.
OK
then press or
.
OK
or to set
.
OK
.
OK
or and
Earth
.
OK
.
OK
When you have more than one
handset registered to your base, you
can set one handset to ring before the
others. This allows one handset user
to answer all incoming calls first, like
a receptionist.
Choose if you want
All Handsets
all handsets to ring at the same time
or to nominate a
Select Handset
handset to ring before the others.
Ring delay options; 2, 4, 6 or 8 rings.
Earth and Timed Break are settings
for switchboard use. If in doubt
please contact your switchboard
service provider.
You can use a Repeater to boost the
range and reception of your base. A
Repeater must be registered with the
base and the Repeater function must
be set to .
ON
The System PIN is used when
changing certain settings and
registration / de-registration.
The default setting is 0000.
You can change this to your
own preferred 4-digit number.
If you make a mistake, press
to delete digits.
26
Clear