To Switch The Outside Ring On And Off; Switching The Stop+Go Function On And Off - AEG 66201 KF-N Installation And Operating Instructions Manual

To switch the outside ring on and off

By switching the outside rings on or off, the effective heating surface
can be matched to the size of the cookware.
3
Before an outside ring can be switched on, the inside ring must be
switched on.
Triple cooking zone
To switch on middle ring
To switch on outside ring
To switch off outside ring Touch
To switch off middle ring
Double ring cooking zone
To switch on outside ring
To switch off outside ring

Switching the STOP+GO function on and off

The STOP+GO function simultaneously switches all cooking zones that
are switched on to the keep warm setting and then back to the heat
setting that was previously set. This function can be used to briefly in-
terrupt and then continue the cooking process e.g. to take a telephone
call.
To switch
on
To switch
off
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field
10
Sensor panel
Touch
Touch
Touch
Sensor field
Touch
Touch
Control panel
Touch STOP+GO
Touch STOP+GO
.
for 1-2 seconds One power indicator is lit.
Two power indicators are
.
for 1-2 seconds
Second power indicator
.
for 1-2 seconds
First power indicator goes
.
for 1-2 seconds
for 1-2 seconds
for 1-2 seconds
Display
u
heat setting that was previ-
ously set (not automatic
warm up function)
Power indicator
lit.
goes out.
out.
Pilot light
is lit
goes out
.