Dial Mode - BT FREESTYLE 250 User Manual

42 Base settings
Tone is the default setting for the UK.
You should only have to change this if
connected to a switchboard that
requires Pulse dialling.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com
4. Enter the existing PIN code using the keypad and press
is displayed.
New PIN
5. Enter a new 4 digit PIN code using the keypad and press
is displayed.
Repeat PIN
6. Re-enter the new PIN code and press
7. Press and hold
Clr

Dial mode

Your BT Freestyle 250 is pre-set to tone dialling (DTMF).
You can set the dial mode to pulse dialling if your
switchboard requires.
1. Press to open the main menu.
Menu
2. Press or until the display shows
press .
Menu
3. Press or until the display shows
to select.
Menu
4. Press or to display either
. You hear a confirmation tone and
Menu
5. Press and hold
Clr
Menu
to return to standby.
Setup base
Dial mode
or
DTMF
Saved
to return to standby.
.
Menu
.
Menu
. is displayed.
Saved
and
and press
and press
Pulse
is displayed.