Set The Day And Time - BT FREESTYLE 250 User Manual

Hide thumbs Also See for FREESTYLE 250:

User manual (72 pages)

User manual (41 pages)

User manual (72 pages)

Table Of Contents

Table of Contents

Getting started

Talk/Standby time

Under ideal conditions, fully charged

handset batteries should give about 10

hours talk time or 100 hours standby

time on a single charge.

Battery low warning

If the

symbol is flashing, you will

need to recharge your handset before

using it.

Battery performance

To keep your batteries in the best

condition, leave the handset off the

base for a few hours at a time (after

the initial 16 hour charge).

New NiMH batteries do not reach full

capacity until they have been in

normal use for several days. Running

the batteries right down at least once

a week will help them last as long as

possible.

IMPORTANT

Only use the power supply and

telephone line cord supplied with your

BT Freestyle 250 otherwise the

telephone may not work.

If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com

2. Batteries will come inserted in the battery compartment. Pull

the plastic tag as instructed to activate the batteries.

3. Place the handset on the base to charge the batteries for at

least 16 hours.

The main handset is pre-registered to the base as –1–

(Handset 1). This is shown on the display. When the handset

is fully charged the display shows the

4. After 16 hours, connect the telephone line cord to the base

and plug the other end into the wall socket.

Telephone line cord