Advertisement
To wall mount your Freestyle 1100 Plus
Before you start ensure that the telephone is
in easy reach of the power supply and a
telephone socket.
Ensure that the wall can support the weight
of the unit.
SCREW
WALL PLUG
WALL
Drill two holes for the screws and insert
•
the wallplugs provided (if required).
Put the screws into the wall, leaving about
•
5mm free to mount the stand/bracket.
Hook the stand/bracket over the screw
•
heads.
Clip the base unit onto the stand/bracket.
Attach the stand/bracket by
hooking it over the screws
protruding from the wall.
Lo
9.00am and 5.30pm Monday to Friday.
• Use the template on the following page to
mark the positions of the screws.
• Insert the screws using the wall plugs
supplied if necessary, leaving a 5mm gap
between the the screw heads and the wall.
• Place the wall bracket (the thin end of the
wedge at the top) over the screw heads and
pull down as far as possible to secure.
• Ensure that the power supply and the
telephone lines are connected to the base
unit, then fit the lines into the channels on
the bottom of the base unit securing the
lines under the small tabs.
• Any spare length of mains and telephone
lead can be stored in the hollow portion of
the wall bracket, but they should not be
wound around each other.
• Fit the top end of the base unit over the lugs
at the top of the wall bracket.
• Ensure that the lines are fitted into their slots
at the bottom of the wall bracket, clip the
base unit to the bottom of the wall bracket.
697146 between
Advertisement
