Advertisement
To reset the unit
When the
button is pressed and
RESET
released the unit will display "PF" followed by
a count down from "36." When the
countdown reaches "00" the unit will beep
and announce the current setting of the
answer delay switch.
The Freestyle 1100 Plus has been preset to
the following factory settings:
• The time and day has been preset to
Sunday 12am.
• The outgoing message is, "Please leave a
message after the tone".
• All incoming messages and notes have
been deleted.
• The PIN code has been reset to "0-0-0".
To Screen incoming calls
SCREEN
When the answer functions are on and a
caller is leaving a message, you can listen to
the incoming message from the base-unit or
the handset without answering. If the handset
is on the base-unit adjust the VOLUME control
if necessary, to hear the message. If the
handset is not on the base-unit press the
button on the handset to listen to the
SCREEN
message. If you decide to answer the call press
the
button. Speak when the CHANNEL
TALK
SEEKER light has stopped flashing
To use the Note function
IN
NOTE
Members of your household can use the
NOTE function on your Freestyle 1100 Plus
to record messages for each other.
These messages are saved with any incoming
messages.
To record a note
• Press and hold the
will announce, "Please speak after the tone,
release the button to end recording".
• After the tone, speak about 20 cm away
from the microphone (located next to the
ANSWER ON/OFF
• Release the
NOTE
finished your message.
The number of messages shown in the display
will increase by one. The note will be saved in
sequential order with any previous incoming
messages or notes.
button. The unit
NOTE
button).
button when you have
Advertisement
