Advertisement
To insert a Pause
SECRECY
RECALL
REDIAL
MEMORY
SCREEN
With some switchboards, after dialling the
access code you may have to wait for a
moment while the switchboard picks up an
outside line. If this is the case, press the
button before keying in the telephone
REDIAL
number to insert a pause.
To use the Recall button
This button signals either time-break recall or
earth recall depending on the setting of the
TEL MODE switch, see
connected to a PBX (Private Branch
Exchange), contact your PBX supplier for
further information. The recall button when
set to time-break recall
BT's Select Services. For further information,
see
To use the Memory functions
The handset can store ten telephone numbers
of up to 20 digits in memory. You can dial any
of these numbers by pressing two buttons.
If you are
is also used for
T-TB
To store a number in a memory
• Pick up the handset and ensure that the
TALK light is not on.
• Press the
MEMORY
will light up.
• Press one of the number buttons 0-9. This
gives you the location code under which
your number will be stored.
• Enter the telephone number.
• Press the
MEMORY
hear a long confirmation beep. The telephone
number is now stored.
Repeat this procedure for any number you
want to store, using a different code number
0-9 for each one.
button. The button pad
button again. You will
✱
#
Advertisement
