Table of Contents
Advertisement
At the new handset:
2. Press and hold
5 seconds, until the display shows a
single
. The
-
display and then show
3. Enter the 4-digit PIN code (default
code 0000) and press
a tone to confirm you have entered
the correct code and the handset
returns to standby mode.
Once registered, you will hear a
confirmation tone and the next
available handset number is allocated
and shown in the display.
Registering a new GAP compatible
handset to your BT Freelance 101
base
To put the BT Freelance 101 base into
registration mode:
1. Press and hold
3 seconds, until the base beeps and
the In use light flashes, then release
the button. The handset will now
remain in registration mode for 90
seconds.
Call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
for approximately
Store
will move across the
-
P1-
.
. You hear
Store
Find
for approximately
Using additional handsets
The default PIN code is
0000.
If you are in an
environment where
there is a lot of electrical
interference you may
experience difficulty
registering to a base.
The handset number
allocated to the new
handset must be used
when making internal
calls.
29
Advertisement
Table of Contents
