Table of Contents
Advertisement
If you have subscribed to your
network's Caller Display service, the
caller's number will flash alternately
with the day and time in the display.
1. Press
to answer the call or, if the
handset is on the base, simply lift it
and speak.
Call timer
Your handset automatically times the
duration of all calls, showing the time
on the display during your call and for
5 seconds after it has finished.
Earpiece volume
There are 5 volume levels to select
from. The default is 3. You can only
adjust the earpiece volume during a
call. You will hear a beep at the
minimum and maximum volume levels.
1. Press
to increase or
decrease the earpiece volume.
The display shows the set volume,
e.g.
.
– 3 –
Call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Caller Display
For more information
on Caller Display, see
page 21.
Hearing aid user?
Please note that the BT
Freelance 101 works by
sending radio signals
between the handset
and base. These signals
may interfere with some
hearing aids, causing a
humming noise.
to
The earpiece volume
will remain at the level
set for all calls until
changed.
Using the phone
13
Advertisement
Table of Contents
