Table of Contents
Advertisement
58
Text messaging
If you select GENERAL MESSAGES
the sub-address has been pre-set
as 9.
Use Clear to delete any exiting
characters/digits.
Follow the instructions for 'set a
user area' to edit a user area.
Mailboxes 1,2 and 3 have sub-
addresses 1, 2 and 3 assigned to
them as default.
The GENERAL MESSAGE user area
is assigned the sub-address of 9.
If you experience any problems, please call the Helpline on 0870 605 8047
6. Scroll
to
Mailbox PIN
changed this from the factory setting of 0000 and PIN
protection is set to ON.
7. Press
Save
. The screen shows your named user area.
How callers send a text to a user area
When your caller sends a text, by simply adding your 1-
digit sub-address number on the end of your telephone
number, the text will automatically be stored in your
personal user area.
Open a user area
When you want to read, write and send text messages,
you must open your user area first.
1. Press
. All user areas are displayed in a list. Scroll
to the user area you want and press
2. If you have set a PIN protection, enter your 4-digit PIN
OK
and press
.
3. You can now read, write, send and delete your messages
as normal.
. Enter your PIN if you have
OK
.
Advertisement
Table of Contents
