Error beep
Lets you know that you have made a
mistake when following a procedure.
Default setting is ON.
In range beep
Tells you the handset is back within
range of the base station.
Default setting is OFF.
• Press the
• Select SETTINGS.
• Select HANDSET SETTINGS.
• Select BEEPS.
• Switch the beep you want to modify.
• Use the
remove or add the beep.
• Press the
Or
• Come out of the beeps menu by
pressing the
To switch ON and remove the
backlight
The light is activated by touching a
button or by the detection of an incoming
call. The default setting is ON. If you
remove this you will not see the current
battery charging level.
• Press the
• Select SETTINGS.
• Select HANDSET SETTINGS.
• Select AUTO BACKLIGHT.
• Switch the light ON or OFF using the
ON/OFF
• Press the
Or
• Come out of the menu without
changing the light by pressing the
GO BACK
28
N
ON
OFF RED
RED
REDI
MENU
and
ON
option button to confirm.
OK
GO BACK
N
ON
OFF RED
RED
REDI
MENU
options.
option to confirm.
OK
symbol.
OK
button.
option buttons to
OFF
option.
OK
button.