Using The Flash - BenQ DC C510 User Manual

•
To disable Macro photography, slide the focus switch back to the Normal mode
[ ].
•
When using the Macro mode, the icon [
•
In the Macro mode, EV compensation, Scene mode and ISO speed cannot be adjusted.
•
In the Macro mode, the flash mode is automatically set to Flash off [
•
After a macro shot is taken, DO NOT FORGET to reset the lens to the Normal mode.

3.1.7 Using the flash

The flash is designed to function automatically when lighting
conditions warrant the use of flash. You can capture an image
using a flash mode suitable to your circumstances.
1. Set the [Scene] mode in the [Capture] menu based on the
desired scenery. (Auto / Sports / Night / Portrait / Landscape /
Backlight)
2. Press the [ ] button located on the rear side of the camera repeatedly until your desired
flash mode appears on the LCD monitor.
3. Compose your image and press the shutter button.
The table below will help you choose the appropriate flash mode.
Icon Flash mode
[Auto] Automatic
flash
Red eye
[ ]
reduction
Forced flash
[ ]
Flash off
[ ]
•
The flash cannot be used in Video Mode.
•
If Landscape [
set to Flash off [
•
In Sports [ ] mode, the flash mode is automatically set to Flash off [
•
In Night [ ] mode, flash photography will automatically detect the ambient lighting. If
the surrounding brightness is low, the flash will fire to Red eye reduction [
8 Using the Camera
Description
The flash fires automatically according to the photographic conditions.
This mode can reduce the red-eye phenomenon when you want to capture
natural-looking images of people and animals in low-light conditions.
When capturing images, the red-eye phenomenon can be reduced by asking
the subject (person) to look at the camera lens or get as close to the camera
as possible.
The flash will always fire regardless of the surrounding brightness. Select
this mode for capturing images with high contrast (backlighting) and deep
shadows.
The flash will not fire. Select this mode in a place where flash photography
is prohibited, or when the distance to the subject is beyond the effective
range of the flash.
] scene is selected in [Capture] menu, the flash mode is automatically
].
] will be displayed on the LCD monitor.
].
M E N U
M O D E
].
].