Using The Self-Timer; Using The Optical Zoom - BenQ DC E600 User Manual

3.1.6 Using the Self-timer

The self-timer can be set in Snapshot Mode. This feature is useful for situations when you
may wish to be part of the picture.
1. Secure the camera to a tripod or place it on a stable surface.
2. In Snapshot Mode, toggle the [
Icon Self-timer
Self-timer (2s)
[ ]
Self-timer (10s)
[ ]
Interval Shoot
[ ]
3. Compose your image and press the shutter button.
•
The self-timer function is activated and the
countdown status is displayed on the LCD
monitor.
•
The self-timer LED indicator flashes and the
image will be captured after the preset time has
elapsed.
•
To cancel the self-timer at any time, press the
[ ] button.
•
The self-timer setting is automatically turned off after an image is captured.

3.1.7 Using the Optical Zoom

Zoom photography allows you to capture images magnified up to 3 times or wide-angle
photography depending on the distance up to the subject. You can further enlarge the center
of the screen and capture images using the digital zoom.
1. Press the [ ] button to enter Snapshot Mode or
Movie Mode.
2. Compose the image with the zoom key.
•
Adjusting the key to the right zooms in on the
subject, and enlarges the subject on the LCD monitor.
•
Adjusting the key to the left provides a wide angle image.
•
The lens position moves according to the zoom setting only in optical zoom period.
3. Press the shutter button down halfway to set the focus and exposure, and then press it
down fully to capture the image.
•
Zoom function cannot be used while a video clip is being recorded. Set the zoom before
you start recording.
] button to select the desired self-timer mode.
Description
The camera automatically takes a picture after two seconds delay.
The camera automatically takes a picture after ten seconds delay.
The camera automatically takes a picture every preset time till media full or
battery empty.
Using the DC E600 9