Using The Self-Timer - BenQ GH210 Series User Manual

Using the Self-timer (Self-timer)
With the Self-timer, pressing the shutter button starts a timer. The shutter is released and
the image is shot after a fixed amount of time.
1.
In the REC mode, press [SET].
2.
Use [ ] and [ ] to select the fourth Control Panel option from the top (Self-
timer).
3.
Use [ ] and [ ] to select the setting you want and then press [SET].
Self-timer:
10 sec.
Self-timer: 2
sec.
Self-timer:
x3
Self-timer: Off
• The front lamp flashes while the Self-timer countdown is in
progress.
• You can interrupt an ongoing Self-timer countdown by
pressing [SET].
NOTE
• The Self-timer cannot be used together with the following features.
Burst, some Scene Mode scenes
• The Triple Self-timer cannot be used together with the following features.
Movie, Simple Mode, some Scene Mode scenes
Downloaded From camera-usermanual.com BenQ Manuals
Self-timer: 10 seconds
Self-timer: 2 seconds
• When shooting under conditions that slow down the shutter
speed, you can use this setting to prevent image blur due to
camera movement.
Shoots three images: one image 10 seconds after the shutter
button is pressed, and the next two images as soon as the camera
is ready after shooting the previous image. How long it takes for
the camera to get ready to shoot depends on the image size and
quality settings, whether or not a memory card is loaded in the
camera, and the flash charge condition.
Turns off the Self-timer.
32
Front lamp