Self-Timer - BenQ GH680 User Manual

mmmmp
mmmmp

Self-timer

This button allows you to set the self-timer setting.
Icon
10-Sec.
/
To enable self-timer setting:
1. Set the mode dial to the desired shooting mode.
2. Press and use left / right of the 4-way control to select your desired setting.
To create a panoramic image:
1. Set the mode dial to
2. Fully press and hold the shutter to start shooting. The
3. If you move camera without keeping straight, the yellow
4. When the progress of the bar goes to the end, the
Mode
2-Sec.
/
10+2 Sec.
Smile Catch
Off
shooting automatically saves the image when finished a
360 degrees take or released the shutter after a 30
degree take (when the icon
starts, a white-cross locates on the center and a yellow
line displays horizontally (or vertically) through the
screen. In addition, a shooting bar displays to present the
shooting position and the progress of the bar indicates
where has been taken.
line will move with the moving scene.
camera would finish automatically and save the panorama
image.
Automatically takes a picture after 2 or 10-second
delay. This mode is useful when you want to be part of
the picture.
Performs delay and capture twice:
Performs a 10-second delay, then captures the image.
Performs another 2-second delay then captures the
image again.
Takes one picture at a time if the camera detects a
smiley face.
Takes one picture at a time.
.
is lit). When shooting
Description
Operating the camera 27