Self-Timer Photography - BenQ DC 4330 User Manual

Self-timer Photography

When the self-timer is used, the camera automatically takes a picture after 10 or 2 seconds. This allows
you to get into the scene when taking group images.
1. Secure the camera to a tripod or place it on a stable surface.
2. Power on the camera, and set the mode dial to the
the mode.
3. Press the button.
You may select or
The selected self-timer mode is displayed on the LCD monitor.
4. Compose the scene.
5. Press the shutter button.
The self-timer function is activated.
The photograph is then taken after the preset time.
To cancel the self-timer at any time, press the
Note:
After an image is taken using self-timer, the self-timer mode is turned off.
If you wish to take another image using the self-timer, repeat these steps.
EN-22
self-timer mode by toggling the
mode or
button.
button or the button.