Electrolux EKG501102 User Manual page 12

electrolux
12
Open the oven door into the horizontal
position. Then lift up the clips on the two
door hinges as far as they will go (a).
Slowly close the door again as far as the
stop and lift the door until the hinges come
out (b).
Replacing the oven door on its hinges
When putting the door back on its hinges,
reverse the procedure for removing the door
from its hinges.
Re-insert the door's hinges into the slots (c).
When you do this, make sure the hinges
engage properly and evenly.
Then slowly lower the door downwards.
When you do this, make sure the corners of
the door do not touch the bottom of the
frame (if this happens, lift the door up again
and realign the hinges).
Finally fold the clips back down towards the
oven (d). So that the door closes properly,
press down on the clips with something
(e.g. a screwdriver) (e).
Slowly check the correct operation of the
door.
Important: Never leave the door hinge levers
standing up. Otherwise the spring action
can lead to injury.
DO NOT clean the oven door while
the glass panels are warm. If this precaution
is not observed the glass panel may shatter.
Do not use harsh abrasive cleaners or sharp
metal scrapers to clean the surface, which
may result in shatting of the glass.