Yamaha Venture XVZ1300TF Owner's Manual page 34

1. Front fork air valve cap
2. Remove the valve cap from each
fork leg.
3. Check the air pressure using the
air pressure gauge in the owner's
tool kit, and adjust it if necessary.
Increasing the air pressure in-
creases the spring preload, de-
creasing the air
decreases the spring preload.
To increase the air pressure, use
an air pump or compressed air.
To decrease the air pressure, re-
lease the air by pushing the valve.
INSTRUMENT AND CONTROL FUNCTIONS
Spring preload (air pressure):
Minimum/Standard:
0 kPa (0 kg/cm
Maximum:
50 kPa (0.5 kg/cm
CAUTION:
@
Never exceed the maximum pres-
sure, or oil seal damage may occur.
@
4. Install the valve caps securely.
pressure
2
, 0 bar)
2
, 0.5 bar)
EC000012
3-20
3