Multi-Function Display - Yamaha YZF-R1 Owner's Manual

1. Multi-function display

2. "SELECT" button
3. "RESET" button
Multi-function display
The multi-function display is equipped
with the following:
G
a speedometer (which shows the
riding speed)
G
an odometer (which shows the to-
tal distance traveled)
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
INSTRUMENT AND CONTROL FUNCTIONS
G
a clock
G a self-diagnosis device
G a display brightness and engine
speed indicator light control mode
NOTE:
_
G
Be sure to turn the key to "ON" be-
fore using the "SELECT" and
"RESET" buttons.
G
For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilome-
EAU04554
ters and
"SELECT" button and "RESET"
button together for at least two
seconds.
_
Odometer and tripmeter modes
Pushing the "SELECT" button switches
the display between the odometer
mode "ODO" and the tripmeter modes
"TRIP 1" and "TRIP 2" in the following
order:
ODO → TRIP 1 → TRIP 2 → ODO
If the fuel level warning light comes on
(see page 3-2), the odometer display
will automatically change to the fuel re-
serve tripmeter mode "F-TRIP" and
miles, press the
start counting the distance traveled
from that point. In that case, pushing
the "SELECT" button switches the dis-
play between the various tripmeter and
odometer modes in the following order:
F-TRIP → TRIP 1 → TRIP 2 → ODO
→ F-TRIP
3-6
3