PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
6
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
EAU24202
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
6-37
Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. Screw
2. Remove the socket (together with
ECA11190
the bulb) by pulling it out.
1. License plate light bulb
2. License plate light unit
EAU24310