Yamaha YZF-R6 Owner's Manual page 23

5. Push the "RESET" button to set
the minutes.
6. Push the "SELECT" button and
then release it to start the clock.
Odometer, tripmeter, and stopwatch
modes
TRIP A
1. Odometer/tripmeters/fuel reserve tripme-
ter/stopwatch
Push the "SELECT" button to switch
the display between the odometer
mode "ODO", the tripmeter modes
"TRIP A" and "TRIP B" and the stop-
watch mode in the following order:
TRIP A → TRIP B → ODO → Stop-
watch → TRIP A
If the fuel level warning light comes on
(see page 3-4), the odometer display
will automatically change to the fuel re-
INSTRUMENT AND CONTROL FUNCTIONS
serve tripmeter mode "F-TRIP" and
start counting the distance traveled
from that point. In that case, push the
"SELECT" button to switch the display
between the various tripmeter, odome-
ter, and stopwatch modes in the follow-
ing order:
F-TRIP → Stopwatch → TRIP A →
TRIP B → ODO → F-TRIP
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
˚C
push the "RESET" button for at least
1
one second. If you do not reset the fuel
reserve tripmeter manually, it will reset
itself automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
Stopwatch mode
To change the display to the stopwatch
mode, select it by pushing the "SE-
LECT" button. (The stopwatch digits
will start flashing.) Release the "SE-
LECT" button, and then push it again
for a few seconds until the stopwatch
digits stop flashing.
Standard measurement
1. Push the "RESET" button to start
2. Push the "SELECT" button to stop
3. Push the "SELECT" button again
Split-time measurement
1. Push the "RESET" button to start
2. Push the "RESET" button or start
3. Push the "RESET" button or start
4. Push the "SELECT" button to reset
NOTE:
To change the display back to the prior
mode, push the "SELECT" button for a
few seconds until the stopwatch digits
flash.
3-9
the stopwatch.
the stopwatch.
to reset the stopwatch.
the stopwatch.
switch " " to measure split-times.
(The colon ":" will start flashing.)
switch " " to display the final split-
time or push the "SELECT" button
to stop the stopwatch and display
total elapsed time.
the stopwatch.
3