Yamaha YZF-R6 Owner's Manual page 58

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Cowling A
2. Turn signal light lead coupler
6
1. Cowling B
2. Turn signal light lead coupler
To install the cowling
1. Connect the turn signal light lead
coupler.
2. Fit the projections into the slots,
slide the cowling rearward, and
then fit the forward-most projection
into the slot.
1. Cowling A
2. Turn signal light lead coupler
1. Cowling B
2. Turn signal light lead coupler
6-9
3. Fit the projection on cowling A into
the hole in cowling B as shown.
1. Cowling A
2. Cowling B
4. Install the bolts, quick fasteners,
and quick fastener screw.
Cowling C
To remove the cowling
1. Remove cowling B and panel B.
(See page 6-7.)
2. Unfasten the wire harness by
pressing on the projection to open
the plastic fastener.
EAU39092