Yamaha YZF-R1 Owner's Manual page 31

2011
Hide thumbs Also See for YZF-R1:
Table of Contents

Advertisement

key and both standard keys to a
Yamaha dealer and have the stan-
dard keys re-registered.
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
Display brightness and shift timing
indicator light control mode
1
1. Shift timing indicator light activation range
2. Shift timing indicator light
3. Brightness adjustable displays
4. Brightness level
This mode allows you to make changes
to six settings by performing the follow-
ing steps.
INSTRUMENT AND CONTROL FUNCTIONS
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
ton.
3. Turn the key to "ON", and then re-
ECA11590
lease the "SELECT" button after
five seconds. The display bright-
ness function is selected.
4. Push the "SELECT" button to
switch the functions in the order
below.
a. Display brightness:
This function allows you to ad-
just the brightness of the dis-
2
plays and tachometer to suit
the outside lighting conditions.
b. Shift timing indicator light activ-
ity:
3
This function allows you to
choose whether or not the indi-
cator light should be activated
and whether it should flash or
4
stay on when activated.
c. Shift timing indicator light acti-
vation:
This function allows you to se-
lect the engine speed at which
the indicator light is activated.
d. Shift timing indicator light deac-
tivation:
TIP
The display shows the current setting
for each function, except the shift timing
indicator light activity function.
To adjust the brightness of the multi-
function meter displays and tachometer
1. Turn the key to "OFF".
2. Push and hold the "SELECT" but-
3. Turn the key to "ON", and then re-
4. Push the "RESET" button to select
3-16
This function allows you to se-
lect the engine speed at which
the indicator light is deactivat-
ed.
e. Shift
timing
indicator
brightness:
This function allows you to ad-
just the brightness of the indi-
cator
light
to
suit
preference.
ton.
lease the "SELECT" button after
five seconds.
the desired brightness level.
light
3
your

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents