Yamaha YZF-R1 Owner's Manual page 68

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Turn signal light lead coupler
To install a cowling
1. Connect the turn signal light lead
coupler.
2. Fit the projections on the cowling
6
into the slots as shown.
2
1. Slot
2. Projection
2
1
1. Slot
2. Projection
3. Install the quick fasteners and the
quick fastener screws.
Cowlings C and D
To remove a cowling
1 1. Remove cowling A (if removing
cowling C) or cowling B (if remov-
ing cowling D). (See page 6-8.)
2. Remove the
screws.
1
1. Cowling C
2. Quick fastener screw
3. Slide the cowling forward to un-
EAU47243
quick fastener
1. Slot
2. Projection
6-9
2 2
2 2
1
hook its projection from the slot,
and then pull the cowling off.
1
2