Replacing A Turn Signal Light Bulb; Replacing The License Plate Light Bulb - Yamaha YZF-R1 Owner's Manual

Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24204
1
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing the license plate
1
light bulb
1. Remove the license plate light unit
1. License plate light unit
2. Screw
2. Remove the license plate light bulb
[ECA11191]
6-36
by removing the screws.
1
2
socket (together with the bulb) by
pulling it out.
EAU24313
6