Samsung Mid462-Ut2 Installation Manual page 13

SAMSUNG Video Wall Kit Setup Guide
3. Fixing
Fixing the monitor to the wall
If the monitor is not fixed to the wall, movement of up to ±1degrees at the front and back may occur.
Therefore, make sure to fix the monitor to the wall using the Top-Bracket.
N
Create a fixing pipe referring to the specifications of the Top-Bracket on the "Product Specifications" page.
[Required Parts]
●
A Wall-Fixing Pipe with a 30mm size (to be created separately.)
●
Fixing Screws
1. After installing the product, connect the Top-Bracket to the top part of the Top-Bracket-Link.
2. Insert the prepared fixing pipe into the Top-Bracket.
3. Check the position of the wall and fix the Top-Bracket to the wall using the screws and fix the product to the
wall.
Note: Maintain a distance of at least 50cm from the wall.
Matrix_ID-Eng.indd Sec1:11 Matrix_ID-Eng.indd Sec1:11
11
3. Fixing
2010-06-08 2010-06-08 3:36:52 3:36:52