Connecting The Dishwasher - Electrolux FAVORIT 50672 User Manual

34

Connecting the dishwasher

If the appliance is built in under a kitchen
work surface, the worktop supplied with
the dishwasher can be removed in the fol
lowing way:
1. Unscrew the screws from the elbows at the
rear (1).
2. Push the appliance's worktop backwards
about 1 cm (2).
3. Lift the worktop at the front (3) and re
move it.
If the dishwasher is later used as a free standing appliance, the work surface
supplied with it must be re mounted.
Connecting the dishwasher
Connecting to the water supply
• The dishwasher can be connected to cold and hot water supplies up to max.
60°C.
• The dishwasher must not be connected to open hot water appliances or in
stantaneous water heaters.
Permitted water pressure
Lowest permitted water pressure:
0,1 MPa ( = 1 bar = 10 N/cm
Highest permitted water pressure:
1 MPa ( = 10 bar = 100 N/cm
Consult your plumber if the water pressure is
2
) less than 0,1 MPa.
If the water pressure is greater than
1 MPa, a pressure reduction valve must be used
2
)
(available from your dealer).