Authorize Ekey; Customize Pin - Supra Phone User Manual

Authorize eKEY

Once the eKEY software is installed, it must be authorized before it can be used. To authorize the eKEY
software, you'll need your 30-digit Authorization code.
New eKEY users can obtain an authorization code from the Association/Board/MLS. Existing eKEY
users can obtain an authorization code by logging into SupraWEB and selecting the Authorization
Code link.
Demo mode is available for customers who have not yet subscribed to eKEY service. Demo mode
allows you to view the eKEY software but you cannot interact with iBoxes.
To authorize your eKEY software:
1. Launch the eKEY application by selecting the eKEY icon.
2. Select Activate eKEY.
3. Following the onscreen prompts, enter your 30-digit Authorization code.
4. Select Authorize.
Figure 3. Authorize eKEY screen
5. Your device will automatically connect and authorize and update the eKEY to access iBoxes.

Customize PIN

You can customize the PIN code you use with your eKEY software.
Chapter 1 5
Introduction