ADSL Router User Manual
Security Features
Configuration and Management
Unpacking
Check the contents of the package against the pack contents checklist below. If any of the items is
missing, then contact the dealer from whom the equipment was purchased.
Static routes, RFC1058 RIPv1, and RFC1723 RIPv2
DNS Relay, Dynamic DNS
DHCP Client/Relay/Server
Time protocol can be used to get current time from network time server
Support IGMP Proxy/Snoop
Support IP/Bridge QoS for prioritize the transmission of different traffic classes
Support port mapping function which allows you to assign all data traffic transmitted among
specific Internet connections and LAN ports
PAP (RFC1334), CHAP (RFC1994), and MS-CHAP for PPP session
Firewall support IP packets filtering based on IP address/Port number/Protocol type
Bridge packet filtering (optional)
URL filtering (optional)
Support DoS (Deny of Services) which detect & protect a number of attacks (such as SYN/FIN/RST
Flood, Smurf, WinNuke, Echo Scan, Xmas Tree Scan, etc)
User-friendly embedded web configuration interface with password protection
Remote management access control via HTTP, TFTP, FTP, Telnet, SSH, SNMP
Telnet session for local or remote management
Firmware upgrades through HTTP, TFTP, or FTP
The boot loader contains very simple web page to allow the users to update the run-time
firmware image.
Configuration file backup and restore
SNMPv1/v2 agent with MIB-II, ADSL Line MIB
ADSL Router
Power Adapter and Cord
RJ-11 ADSL Line Cable
RJ-45 Ethernet Cable
Quick Start Guide
Driver & Utility Software CD
vii