Quality Of Service - Siemens SL2-141 User Manual

Chapter 5:Connection Mode
A new IP filtering setting for Outbound
traffic is created in the web page. To edit the
setting, please click the pencil mark to get
into the editing page. To delete the setting,
click the trash mark to erase it. To set
another IP filtering, click Add again.
For adding a new Inbound IP Filtering, click
Inbound traffic in the item of Select the
direction to filter packets. Use the same
way to add a new one as stated above.

Quality of Service

QoS (Quality of Service) is an industry-wide initiative to provide preferential treatment to certain
subsets of data, enabling that data to traverse the Internet or intranet with higher quality transmission
service.
Bridge QoS
To classify the upstream traffic by assigning
the transmission priority for data of different
users, please use Bridge QoS to prioritize the
data transmission.
The Bridge QoS allows you to set the
settings based on layer two IP packets.
Traffic Class Name:
Type in a name as the traffic class for
identification.
802.1p Priority:
Each incoming packet will be mapped to a
specific priority level, so that these levels
may be acted on individually to deliver
traffic differentiation. Please choose the
number (from 0 to 7) for the 802.1p Priority.
Traffic Priority:
There are three options – Low, Medium, and
High that you can choose.
IP Precedence:
The number you choose here decides the
type of the IP address processed. No change
99