Audio; Drive Vehicles; Gal (Speed Dependent Volume); Setting Microphone Sensitivity - Becker MEXICO Operation Manual

Settings

Audio

The Audio section includes system
settings for audio mode.

GAL (speed dependent volume)

GAL is a control circuit on the Mexico.
This control circuit automatically
increases the volume of the Mexico
depending on the speed of the vehicle.
You can define the extent to which the
volume should be increased depending
on the speed of the vehicle here.
X Select in the system settings.
X Select
7016
X Turn the rotary control/push button
to select the required value.
180
Note:
A setting of "0" indicates no increase in
volume.
A setting of "20" indicates the maximum
increase in volume.

Setting microphone sensitivity

You can adjust the sensitivity of the
hands-free microphone for telephone
calls. This may be necessary, for examp-
le, if the other party finds you too quiet
or too loud.
X Select in the system settings.
.
X Select
7061
X Turn the rotary control/push button
to select the required value.
Note:
A setting of "-5" sets the lowest sensiti-
vity.
A setting of "+5" sets the highest sensi-
tivity.
Settings for left-hand/ right-hand

drive vehicles

Navigation
telephone
announcements are transmitted via
different
function you can specify whether your
car is a left-hand drive or right-hand
drive vehicle and therefore set the
transmission accordingly.
X Select
X Select
.
7052
X Select between
announcements and
calls/ voice mode
loudspeakers. Using this
in the system settings.
and
(on = ).
.