Switching The Unit On/Off; Switching On; Switching Off - Becker MEXICO Operation Manual

General operation

Switching the unit on/off

Switching on

X Press the left rotary control/push but-
ton .
or
X If the Mexico was switched off via the
ignition, the Mexico will switch back
on once the ignition has been switched
on.
1010
X Confirm the warning which appears
by pressing the rotary control/push
button .
16
Notes:
• Unless the warning message is con-
firmed, the Mexico will remain disa-
bled.
• Once it has been switched on, the
Mexico will play back the last source
selected (radio or media).
• If fewer than approx. 2 hours have
elapsed since the unit was last
switched off, active route guidance
will be restarted.
• If the volume was set to a very loud
value before the unit was last switched
off, it will be reset to setting 26 when
the unit is switched back on.

Switching off

X Press the left rotary control/push but-
ton .
If the ignition is switched on, the Mexico
is switched to standby mode. The dis-
play goes dark and the Mexico sound is
switched off.
or
X Switch off the vehicle ignition.
1010
The shutdown display appears for
approx. 5 seconds.
During this period of approx. 5 seconds,
shutdown can be aborted by pressing
one of the buttons on the Mexico or by
switching the ignition back on.
The Mexico then switches itself back on
and plays back the last source selected
(radio or media).