Displaying/Changing Route Settings; Information During Non-Active Route Guidance; Displaying/Storing A Position; Displaying Tmc Messages - Becker MEXICO Operation Manual

Navigation mode

Displaying/Changing route settings

X Press .
X Turn the rotary control/push button
clockwise until appears on the top
right of the display.
2081
The current route settings are displayed.
Press the rotary control/push button
X
.
2082
X Select
or the avoid functions (on =
54
Note:
Only one of the three settings (
,
active ( ) at the same time.
For more information about route
options, see "Setting the route options"
on page 32.
The route is calculated with the new
route options.
Information during non-active
route guidance

Displaying/Storing a position

You can display and store the current
position. See "Displaying/Storing posi-
, tion" on page 53.
).

Displaying TMC messages

You can display TMC messages as de-
scribed in "Displaying traffic announce-
ments" on page 53. Of course, no traffic
announcements are displayed for the
route.
Dynamic route guidance
with TMC
) may be
Note:
Dynamic route guidance is not possible
in all countries.
When new route calculations are made
with active dynamic route guidance, the
navigation system may request the
memory card containing the navigation
data (if it is not already inserted).
What is dynamic route
guidance?
Dynamic route guidance is used to cal-
culate the route, taking current traffic
announcements into account.
The traffic announcements are transmit-
ted by a TMC radio station in addition to
the radio programme and are received
and analysed by the navigation system.
The reception of traffic announcements
is free of charge.