Unpacking; Contents; Transport - MK Diamond Products MK-370EXP Owners Manual, Parts List & Operating Instructions

MK-370EXP SAW

UNPACKING

CAUTION
Remove the MK-370EXP Saw and accessory box from the carton.

CONTENTS:

One (1) MK-370EXP frame & water pan
One (1) MK-370EXP cutting head
One (1) 7-inch wet cutting blade
One (1) splash guard
One (1) splash guard wing nut & washer
One (1) extended rip guide
One (1) electric water pump
MK-370EXP
Frame & Water Pan
Extended
Rip Guide
Blade Nut
Wrench

TRANSPORT

CAUTION
1. The MK-370EXP Saw weighs approximately thirty-three (33) pounds; use care when transporting.
2. Never transport the MK-370EXP Saw with water in the Water Pan.
The MK-370EXP Saw is designed with a rigid frame and removable Cutting Head making the saw
easily transportable. To lift the saw, grasp the front and back of the frame at the lift points shown
below.
Lift Point
Use proper lifting techniques when lifting the MK-370EXP Saw
MK-370EXP
Cutting Head
Electric
Water Pump
Shaft
Wrench
One (1) pump discharge fitting
One (1) cooling transfer tube
One (1) Flow adjusting clamp
One (1) blade wrench
One (1) shaft wrench,
One (1) owners manual
One (1) pump manual
Diamond Blade
Pump
Discharge Fitting
www.mkdiamond.com
MK-370EXP TILE SAW
OWNERS MANUAL &
OPERATING INSTRUCTIONS
Revision 301 03.2009
Caution: Read all safety and operating instructions before
using this equipment. This parts list MUST accompany the
equipment at all times.
MK Diamond Products, Inc.
Owner's
Manual
16
UNPACKING
One (1) warranty card
Splash Guard Splash Guard
Wing Nut & Washer
Cooling
Transfer Tube Adjusting Clamp
Pump
Manual
Cutting
Head
Lift Point
Flow
Warranty
Card