Removing The Transport Support; Rear Spacers - AEG A62900GSB1 User Manual

REMOVING THE TRANSPORT SUPPORT

3

REAR SPACERS

Your appliance is equipped with transport
support to secure the door during trans-
portation.
To remove them do these steps:
• Open the door.
• Remove the transport support from the
door sides.
• Remove the transport support from the
lower hinge (some models).
Some models are fitted with a si-
2
lencing pad under the cabinet. Do
not remove this pad.
• Install the spacers provided within the
accessory bag as shown in the figure.
• Install the adhesive spacers on the back
side of the appliance.
ENGLISH
17