Table of Contents
Advertisement
44
Cleaning and Care
5. Hold the upper edge of the door glass and take
it out of the guide by pulling it upwards.
6. Tip the water collecting channel towards the
door glass and lift upwards to remove from the
guide.
Cleaning the door glass and the water collecting channel
Clean the door glass panels and the water collecting channel thoroughly with a solution
of water and washing-up liquid. Then dry them carefully.
Inserting door glass panels and the water collecting channel
1. Insert the snap-in hook of the water collecting
channel sideways into the guide. Apply some
pressure from above to snap in hook on the
other side.
2. From above, insert the door glass at an angle
into the door profile at the bottom edge of the
door and lower it.
Advertisement
Table of Contents
