Content English Thank you for choosing an AEG Ergorapido vacuum cleaner. Ergorapido is a rechargeable handheld stick vacuum cleaner intended for use on light dry household debris. In order to ensure the best results, always use original AEG accessories. They have been designed especially for your vacuum cleaner.
Unpacking and assembly Unpacking and assembly 1. Check that all parts are in the box. Fit the handle 2. Secure the handle by tightening the locking screw by carefully inserting it into the lower main body. supplied. Use a screwdriver or a coin. Make sure that the cable does not jam.
Charging Charging 1. Ergorapido: The indicator light will come on 2. Ergorapido Plus: The battery capacity display 3. When fully discharged, approximately 16 hours’ once the Ergorapido is positioned correctly in the lights will come on one after another as the charging is required to regain full battery capacity charging station.
Vacuuming Vacuuming floors and carpets 2. Start Ergorapido by pushing the on/off button. 3. Adjust the power level by pushing the lower part of 1. You should regularly check that the nozzle the on/off button: wheels and the brush roll are clean in order to avoid scratching sensitive floors.
Emptying and cleaning Emptying and cleaning Ergorapido’s dust container must be emptied regularly and the dust container and the filters need to be cleaned to maintain a high suction power. Never wash dust containers or filters in a dishwasher. 1. Quick emptying of the dust container. Open the 2.
Cleaning Cleaning the brush roll with the BRUSHROLLCLEAN™ TECHNOLOGY function* The brush roll, the hose and the wheels may need to be cleaned if they become blocked or jammed for any reason. Some Ergorapido models are equipped with BRUSHROLLCLEAN™ TECHNOLOGY – a brush cleaning function that helps to keep a clean brush easily.
Page 9
Cleaning Cleaning the brush roll To remove thicker threads or wires as well as on models that are not equipped with the BRUSHROLLCLEAN™ TECHNOLOGY, the brush should be cleaned according to the following instructions. 1. First turn Ergorapido off. Push the brush roll 2.
Removing the batteries Removing batteries Improper handling of the batteries may be hazardous. Return the complete handheld unit to a recycling station. Batteries must be removed from the appliance before it is scrapped or recycled. Never dispose used batteries with household waste. 1.
If the supply cord or charger is damaged, it must be authorized AEG service centre. replaced by AEG or its service agent or an equally qualified person in order to avoid a hazard. This appliance is not intended for use by persons...
Page 12
Share more of our thinking at www.electrolux.com AG92x-4xEN-2-rev-4...