Multi-Function Meter Unit - Yamaha XJ6F Owner's Manual

Multi-function meter unit

1 2 3
8 7 6 5
1. Fuel meter
2. Coolant temperature display
3. Speedometer
4. Tachometer
5. Odometer/tripmeter/fuel reserve tripmeter
6. "SELECT" button
7. "RESET" button
8. Clock
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
INSTRUMENT AND CONTROL FUNCTIONS
EAU46765 The multi-function
equipped with the following:
● a speedometer
4
● a tachometer
●
an odometer
●
two tripmeters (which show the
distance traveled since they were
last set to zero)
● a fuel reserve tripmeter (which
ABS
shows the distance traveled since
the left segment of the fuel meter
started flashing)
●
a clock
●
a fuel meter
● a coolant temperature display
● a self-diagnosis device
TIP
●
Be sure to turn the key to "ON" be-
fore using the "SELECT" and "RE-
EWA12422
SET" buttons.
● For the U.K. only: To switch the
speedometer and odometer/trip-
meter displays between kilometers
and miles, press the "SELECT"
button for at least one second.
meter unit is Tachometer
1. Tachometer
2. Tachometer red zone
The electric tachometer allows the rider
to monitor the engine speed and keep it
within the ideal power range.
When the key is turned to "ON", the ta-
chometer needle will sweep once
across the r/min range and then return
to zero r/min in order to test the electri-
cal circuit.
NOTICE
Do not operate the engine in the ta-
chometer red zone.
Red zone: 11666 r/min and above
3-8
1
2
3
ABS
ECA10031