1
1. Bolt (
2)
Seat
To remove the seat
Remove the bolts, and then pull the
seat off.
INSTRUMENT AND CONTROL FUNCTIONS
2
1. Projection
2. Seat holder
EAU01092
To install the seat
1. Insert the projection on the front
of the seat into the seat holder
as shown.
2. Place the seat in the original
position, and then tighten the
bolts.
NOTE:
Make sure that the seat is properly
secured before riding.
1
1. Helmet holder
Helmet holder
To open the helmet holder, insert the
key into the lock, and then turn the
key as shown.
To lock the helmet holder, place it in
the original position, and then remove
the key.
w
Never ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
dent.
3-9
1
EAU00260
EW000030
1
2
3
4
5
6
7
8
9