Handlebar Switches - Yamaha TRICKER XG250 Owner's Manual

Handlebar switches

Left
1
2
3
1. Dimmer switch " / "
2. Turn signal switch " / "
3. Horn switch " "
INSTRUMENT AND CONTROL FUNCTIONS
Right
EAU12343
1
2
1. Engine stop switch "
2. Start switch " "
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
leased, the switch returns to the center
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch "
Press this switch to sound the horn.
Engine stop switch "
Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
/ "
Start switch "
Push this switch to crank the engine
EAU12400
with the starter.
/ "
" for the high
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
EAU12460
/ "
". When re-
3-3
EAU12500
"
EAU12660
/ "
" before starting
2
" to
3
4
EAU12710
"
5
ECA10050
6
7
8
9