Checking And Lubricating The Cables; Checking And Lubricating The Throttle Grip And Cable - Yamaha MT-03 Owner's Manual

2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive
chain with a special O-ring chain
lubricant.
CAUTION:
Do not use engine oil or any other
lubricants for the drive chain, as
they may contain substances that
could damage the O-rings.
PERIODIC MAINTENANCE AND MINOR REPAIR
Checking and lubricating
the cables
The operation of all control cables and
the condition of the cables should be
ECA11110
checked before each ride, and the ca-
bles and cable ends should be lubri-
cated if necessary. If a cable is dam-
aged or does not move smoothly,
have a Yamaha dealer check or re-
place it.
Recommended lubricant:
Engine oil
WARNING
0
Damage to the outer sheath may in-
terfere with proper cable operation
and will cause the inner cable to
rust. Replace a damaged cable as
soon as possible to prevent unsafe
conditions.
EAU23100
Checking and lubricating
the throttle grip and cable
The operation of the throttle grip
should be checked before each ride.
In addition, the cable should be lubri-
cated at the intervals specified in the
periodic maintenance chart.
EWA10720
6-25
EAU23111
1
2
3
4
5
6
7
8
9
10