Yamaha MT-03 Owner's Manual page 36

INSTRUMENT AND CONTROL FUNCTIONS
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the engine stop switch is turned on.
1
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Push the start switch.
2
Does the engine start?
3
4
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
5
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
6
7
After the engine has stalled:
8
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the start switch.
9
Does the engine start?
10
The system is OK. The motorcycle can be ridden.
YES NO
YES NO
YES NO
NOTE:
This check is most reliable if performed with a
warmed-up engine.
The neutral switch may be defective.
The motorcycle should not be ridden until checked by a
Yamaha dealer.
The sidestand switch may be defective.
The motorcycle should not be ridden until checked by a
Yamaha dealer.
The clutch switch may be defective.
The motorcycle should not be ridden until checked by a
Yamaha dealer.
3-20