Yamaha MT-03 Owner's Manual page 31

1. Yamaha U-LOCK (optional)
2. Fastening strap
3. Owner's tool kit
The passenger seat is designed to
fasten a genuine Yamaha U-LOCK to
the bottom of the seat. (Other locks
may not fit.) When fastening a U-
LOCK to the seat, securely fasten it
with the straps. When the U-LOCK is
not fastened to the seat, be sure to se-
cure the straps to prevent losing them.
INSTRUMENT AND CONTROL FUNCTIONS
Rider seat
1. Rider seat mounting bolts
To remove the rider seat
1. Remove the passenger seat.
2. Remove the bolts, and then pull
the rider seat off.
3-15
To install the rider seat
1. Projection
2. Seat holder
1. Insert the projection on the front
of the rider seat into the seat hold-
er as shown, place the seat in the
original position, and then tighten
the bolts.
2. Install the passenger seat.
NOTE:
Make sure that the seats are properly
secured before riding.
1
2
3
4
5
6
7
8
9
10