Ignition Circuit Cut-Off System - Yamaha MT-03 Owner's Manual

WARNING
0
The vehicle must not be ridden
with the sidestand down, or if the
sidestand cannot be
moved up (or does not stay up),
otherwise the sidestand could con-
tact the ground and distract the
operator, resulting in a possible
loss of control. Yamaha's ignition
circuit cut-off system has been de-
signed to assist the operator in ful-
filling the responsibility of raising
the sidestand before starting off.
Therefore, check this system regu-
larly as described below and have
a Yamaha dealer repair it if it does
not function properly.
INSTRUMENT AND CONTROL FUNCTIONS
EWA10240
Ignition circuit cut-off
system
The ignition circuit cut-off system
properly
(comprising the sidestand switch,
clutch switch and neutral switch) has
the following functions.
G
It prevents starting when the
transmission is in gear and the
sidestand is up, but the clutch
lever is not pulled.
G
It prevents starting when the
transmission is in gear and the
clutch lever is pulled, but the side-
stand is still down.
G
It cuts the running engine when
the transmission is in gear and
the sidestand is moved down.
Periodically check the operation of the
ignition circuit cut-off system accord-
ing to the following procedure.
EAU15311
If a malfunction is noted, have a
Yamaha dealer check the system
before riding.
3-19
WARNING
0
EWA10250
1
2
3
4
5
6
7
8
9
10