Checking The Brake And Clutch Fluid Levels - Yamaha FJR1300 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
a. Lining thickness
Rear brake pads
Check each rear brake pad for damage
and measure the lining thickness. If a
brake pad is damaged or if the lining
6
thickness is less than 0.8 mm, have a
Yamaha dealer replace the brake pads
as a set.
Rear Front brake
1. Minimum level mark
EAU04510
Checking the brake and clutch
fluid levels
Insufficient brake fluid may allow air to
enter the brake or clutch systems, pos-
sibly causing them to become ineffec-
tive.
Before riding, check that the brake fluid
is above the minimum level mark and
replenish if necessary. A low brake flu-
id level may indicate worn brake pads
and/or brake system leakage. If the
brake level is low, be sure to check the
brake pads for wear and the brake sys-
tem for leakage.
Rear brake
1. Minimum level mark
EAU04169
NOTE:
The rear brake fluid reservoir is located
behind panel F. (See page 6-7 for pan-
el removal and installation proce-
dures.)
_
6-23