Replacing A Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb; Troubleshooting - Yamaha FJR1300 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
1. Socket
Replacing a tail/brake light
bulb
1. Remove the passenger seat. (See
6 page 3-12 for passenger seat re-
moval and installation procedures.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
3. Remove the defective bulb by
turning it counterclockwise.
4. Insert a new bulb into the socket,
and then turn it clockwise until it
stops.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the passenger seat.
1. Screw
EAU04000
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
_
Do not overtighten the screw, other-
wise the lens may break.
_

Troubleshooting

Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur dur-
ing operation. Any problem in the fuel,
compression, or ignition systems, for
example, can cause poor starting and
loss of power.
The following troubleshooting charts
represent quick and easy procedures
EAU03497
for checking these vital systems your-
self. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replace-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
ECA00065
6-35
EAU03087