Brake Light Switch Adjustment; Checking The Front And Rear Brake Pads - Yamaha DT125R Owner's Manual

1
2
b
a
1. Brake light switch
2. Adjusting nut
Brake light switch
adjustment
The rear brake light switch is activat-
ed by the brake pedal and is properly
adjusted when the brake light comes
on just before braking takes effect.
To adjust the rear brake light switch,
hold the switch body so it does not
rotate while turning the adjusting nut.
Turn the adjusting nut in direction a
to make the brake light come on earli-
er.
Turn the adjusting nut in direction b
to make the brake light come on
later.
PERIODIC MAINTENANCE AND MINOR REPAIR
FRONT
1. Wear limit: 0.8 mm
Checking the front and rear
EAU00713
brake pads
Check the brake pads for damage
and wear. If the thickness is less than
the specified value, have a Yamaha
dealer replace the pads.
1
1. Wear limit: 0.8 mm
EAU00717
6-23
REAR
1
1
2
3
4
5
6
7
8
9