Starting A Warm Engine - Yamaha DT125R Owner's Manual

1. Turn the fuel cock to "ON".
2. Turn the main switch to "ON" and
the engine stop switch to "#".
3. Shift the transmission into neu-
tral.
NOTE:
When the transmission is in neutral,
the neutral indicator light should be
on. If the light does not come on, ask
a Yamaha dealer to inspect it.
4. Turn on the starter (choke) and
completely close the throttle grip.
5. Kick the kick starter to start the
engine.
6. After starting the engine, move
the starter (choke) to the halfway
position.
OPERATION AND IMPORTANT RIDING POINTS
NOTE:
For maximum engine life, never
accelerate hard with a cold engine!
7. After the engine is warm, turn off
the starter (choke) completely.
NOTE:
The engine is warm when it responds
normally to the throttle with the starter
(choke) turned off.
5-3

Starting a warm engine

The starter (choke) is not required
when the engine is warm.
cC
See the "Engine break-in" section
prior to operating the motorcycle
for the first time.
EAU01258
1
EC000046
2
3
4
5
6
7
8
9