Instrument And Control Functions; Main Switch; Indicator Lights - Yamaha DT125R Owner's Manual

EAU00027
ON
OFF

Main switch

The main switch controls the ignition
and lighting systems. Its operation is
described below.
ON
Electrical circuits are switched on.
The engine can be started. The key
cannot be removed in this position.
OFF
All electrical circuits are switched off.
The key can be removed in this posi-
tion.

INSTRUMENT AND CONTROL FUNCTIONS

1 2 3
1. Turn indicator light "5"
2. High beam indicator light "&"
EAU00028
3. Neutral indicator light "N"
4. Oil level indicator light "

Indicator lights

EAU00036
Turn indicator light "5"
This indicator flashes when the turn
switch is moved to the left or right.
EAU00038
Neutral indicator light "N"
This indicator comes on when the
transmission is in neutral.
High beam indicator light
This indicator comes on when the
4
headlight high beam is used.
Oil level indicator light "
This indicator comes on when the oil
level is low. This light circuit can be
checked by the procedure on page 3-
2.
cC
"
7
EAU00056
Do not run the motorcycle until
you know it has sufficient engine
oil.
EAU00057
NOTE
Even if the oil is filled to the specified
level, the indicator light may flicker
EAU00061
when riding on a slope or during sud-
den acceleration or deceleration, but
this is normal.
3-1
EAU00063
"&"
1
EAU01313
2
"
7
3
4
EC000000
5
6
7
8
9